Wholesale Best Sae J1453-2 Factories – Hydraulic Fluid Power Winner Brand One Piece Hose Fittings – Standard – Winner Fluid

Product Introduction

Winner brand is famous brand in China even in globally, this brand was created in 1992 in China Ningbo Winner hydraulic fluid company, the Winner brand 1 Piece hose fittings are the advanced hose fittings developed from Winner 2 Piece hose fitting, and with pre-crimped socket.

Winner brand 1 piece standard hose fittings are different from 2 piece standard hose fittings, when order 2 piece standard hose fittings need order nipple and socket with separate part no., and order 1 piece standard hose fittings only need order fitting with assembly part no., 2 piece standard hose fittings have two type separate socket 03310 and 00110, socket 03310 series match with two wire braid hose, such as ISO 1436 type 2SN and R2ATS hose, SAE J517 100R2AT etc. 00110 series socket match with one wire braid hose, such as ISO 1436 type 1SN and R1ATS hose, SAE J517 100R1AT etc. so you need choice the socket part no. as what matched hose is one wire braid or two wire braid.

1 Piece standard hose fittings use same series socket match with one wire braid hose and two wire braid hose, and the socket had been pre-crimped on the nipple, so  no need choice socket when order the fittings, only need order a hose fitting assembly.

1 Piece standard hose fittings match with one wire braid or two braids hose having a thin cover, and no hose cover skive needed when assemble fittings, those hose and fittings matching are more friendly for green environment. 

1 Piece standard hose fittings assemble with hose, just need insert the nipple of fittings into the hose inner hole, and the socket will be on the hose cover, then crimped outside of the socket, and crimped tight the fitting and hose together, after crimped, the hose assembly need withstand the burst pressure and impulse testing etc. with no leakage. To ensure the assemble quality it is necessary make a mark on the hose for the insert position before assemble fittings.

1 Piece Standard hose fittings are made of carbon steel, for nominal hose inside diameters of 6,3 mm to 51 mm, inclusive, and stainless steel is available, detail see the catalogue sheets.

Leave Your Message