<< Previous：Hydraulic Fluid Power Winner Brand Two Piece Hose Fittings – Standard Hydraulic Fluid Power Winner Brand Two Piece Hose Fittings – Spiral :Next >>

Wholesale Best Din Coupling Fitting Manufacturer – Hydraulic Fluid Power Connection Winner BSPT Connectors / Adapters – Winner Fluid

Product Introduction

Product Number

Leave Your Message

Product Tags

Feedback (2)

Our commission should be to provide our customers and consumers with ideal top quality and aggressive portable digital products for DKO hose fitting, DKO one piece hose fitting, Bobcat Hydraulic Quick Coupling, All prices depend upon the quantity of your order; the more you order, the more economical the price is. We also offer good OEM service to many famous brands.

Wholesale Best Din Coupling Fitting Manufacturer – Hydraulic Fluid Power Connection Winner BSPT Connectors / Adapters – Winner Fluid Detail:

Product Introduction

Winner brand BSPT connectors at least has BSPT thread male or female connect end in the connector, BSPT is British Standard Pipe Taper thread, it is similar to NPT thread.

The BSPT thread has below characteristics:

1. The truncation of roots and crests of thread are flat

2. 55°thread angle

3. The angle between taper and center axis of pipe thread is 1°47’24”

4. Thread pitch measured per inch.

43d9caa68

British Standard Pipe threads are similar in function to NPT threads, and the thread is similar, BSPT thread angle is 55°，NPT thread angle is 60°, the pitch and diameter are similar too, but they are not interchangeable. The thread dimensions compare list see below.

Size	NPT thread (60°)				BSPT thread（55°）
Size	thread	base O.D.	base length	threads per inch	thread	base O.D.	base length	threads per inch
-2	Z1/8″x27	10.242	4.102	27	R1/8″x28	9.728	4	28
-4	Z1/4″x18	13.616	5.785	18	R1/4″x19	13.157	6	19
-6	Z3/8″x18	17.055	6.096	18	R3/8″x19	16.662	6.4	19
-8	Z1/2″x14	21.224	8.128	14	R1/2″x14	20.955	8.2	14
-12	Z3/4″x14	26.569	8.618	14	R3/4″x14	26.441	9.5	14
-16	Z1″x11.5	33.228	10.16	11.5	R1″x11	33.249	10.4	11
-20	Z1.1/4″x11.5	41.985	10.668	11.5	R1.1/4″x11	41.91	12.7	11
-24	Z1.1/2″x11.5	48.054	10.668	11.5	R1.1/2″x11	47.803	12.7	11
-32	Z2″x11.5	60.092	11.065	11.5	R2″x11	59.614	15.9	11

BSPT male threads seal against threads of fixed BSPT female, use of a thread sealant such as PTFE sealant tape is recommended for BSPT male to BSPT female connections.

BSPT adapter or BSPT connectors are popular, it is mostly used in Japan, China, almost not used in America. NPT adapter or NPT connectors are popular too, it is mostly used in America.

How to identify it is a BSPT thread and determine the thread size?

1. Visual inspection the thread and it is taper, or use a caliper measure the out diameter of external thread or the minor diameter of internal thread in different length position and found the diameter is different and meet 1:16 taper, or directly use a 1:16 cone gauge.

2. Use a caliper measure the diameter of base line position. Measure the thread diameter with an ID/OD caliper, external thread diameter is measured on the out diameter, and holding the caliper at a slight angle for a more accurate reading, for internal thread is measured on the internal diameter, and holding it perpendicular to the thread for a more accurate female reading.

3. Measure the threads per inch (TPI) or the pitch. As the measured diameter and use relational pitch gauge, try different thread gauges until determine the tightest fit, engage as many threads as possible, there are more thread engaged, the more accurate the reading. Hold the fitting/connector and thread pitch gauge up to the light, looking for gaps between the gauge and thread, this is easier to see on a external thread fitting/connector than a internal thread fitting/connector. Or directly measure the distance of two threads crest

The normal Winner plating of adapters/connectors are free of Cr6+, and the corrosion protection performance reached 360h no red rust, it exceeds normal standard.

Product detail pictures: