How work and connect in hydraulic fluid power system?
In fluid power systems, power is transmitted and controlled through a fluid (liquid or gas) under pressure within an enclosed circuit. In general applications, a fluid may be conveyed under pressure.
Components may be connected through their ports by connectors and conductors (tubes and hoses). Tubes are rigid conductors; hoses are flexible conductors.
What use for ISO 8434-3 O-ring face seal ORFS connectors?
ISO 8434-3 O-ring face seal ORFS connectors for use in fluid power and general applications within the limits of pressure and temperature specified in standard.
O-ring face seal ORFS connectors are intended for the connection of tubes and hose fittings to ports in accordance with ISO 6149-1.( See ISO 12151-1 for related hose fitting specification)
What is the typical connection?
Below is the typical example of a ISO 8434-3 O-ring face seal ORFS connection.
Figure 1 — Typical O-ring face seal connection
Key
1 straight stud connector body
2 tube nut
3 tube
4 braze-on sleeve
5 O-ring
a Stud end in accordance with ISO 6149-2.
What need pay attention when install O-ring face seal ORFS connectors?
When install the ORFS connectors to other connectors or tubes shall be carried out without external loads, and tighten the connectors as the number of wrenching turns or assembly torque.
Where will use O-ring face seal ORFS connectors?
ORFS connectors widely used in US, utilized in hydraulic systems on mobile and stationary equipment sch as excavator, construction machinery, tunnel machinery, crane, etc.
Post time: Feb-07-2022