The Application of ISO 12151-6 Hose Fitting

How work and connect in hydraulic fluid power system?

In hydraulic fluid power systems, power is transmitted and controlled through a liquid under pressure within an enclosed circuit. In general applications, the fluid can be conveyed under pressure.

Components are connected through their ports by stud ends on fluid conductor connectors to tubes/pipes or to hose fittings and hoses.

What use for ISO 12151-6 hose fitting?

ISO 12151-6 hose fitting (BSP 60°cone hose fitting) are for use in hydraulic fluid power systems with hose that meets the requirements of the respective hose standards and in general applications with suitable hose.

What is the typical connection in system?

Below is the typical example of a ISO 12151-6 hose fitting with BSP 60°cone connection.

img

What need pay attention when install hose fitting/ hose assembly ?

When install the BSP 60°cone hose fittings to other connectors or ports shall be carried out without external loads, and tighten the hose fittings as the number of wrenching turns or assembly torque, and when tighten the hose fittings need keep the hose no twist, otherwise the life of hose will be reduced.

Where will use BSP 60°Cone hose fittings / hose assemblies?

BSP 60°cone hose fittings widely used in Europe, utilized in hydraulic systems on mobile and stationary equipment sch as construction machinery, industry, etc.


Post time: Feb-07-2022