How work and connect in hydraulic fluid power system?
In hydraulic fluid power systems, power is transmitted and controlled through a liquid under pressure within an enclosed circuit. In general applications, the fluid can be conveyed under pressure.
Components are connected through their ports by stud ends on fluid conductor connectors to tubes/pipes or to hose fittings and hoses.
What use for ISO 12151-3 hose fitting?
ISO 12151-3 hose fitting (flange hose fitting) are for use in hydraulic fluid power systems with hose that meets the requirements of the respective hose standards and in general applications with suitable hose.
What is the typical connection in system?
Below is the typical example of a ISO 12151-3 flange hose fitting connection with flange port.
Key
1 hose fitting
2 port, flanged head and clamp per ISO 6162-1 or ISO 6162-2
3 O-ring seal
What need pay attention when install hose fitting / hose assembly?
When install the flange hose fittings to other connectors or ports shall be carried out without external loads, and tighten the screw as the recommended assembly procedures and screw torque levels for flange connections conforming to ISO 6162-1(873xx series) and ISO 6162-2(876xx series)
How to assemble flange connections conforming to ISO 6162-1
How to assemble flange connections conforming to ISO 6162-2
Where will use flange hose fittings / hose assemblies?
Flange hose fittings widely used all over the world, utilized in hydraulic systems on mobile and stationary equipment sch as excavator, construction machinery, tunnel machinery, crane, etc.
Post time: Feb-07-2022