Technology
-
The Application of ISO 12151-5 Hose Fitting
How work and connect in hydraulic fluid power system? In hydraulic fluid power systems, power is transmitted and controlled through a liquid under pressure within an enclosed circuit. In general applications, the fluid can be conveyed under pressure. Components are conne...Read more -
The Application of ISO 12151-6 Hose Fitting
How work and connect in hydraulic fluid power system? In hydraulic fluid power systems, power is transmitted and controlled through a liquid under pressure within an enclosed circuit. In general applications, the fluid can be conveyed under pressure. Components are conne...Read more -
24° cone connection methods
1 How many methods for 24° cone connection There are 4 typical types for 24° cone connection methods, see below table, and No. 1 and 3 connection methods are specified in ISO 8434-1. Recently more and more using No.4 as the connection method for eliminating cutting rin...Read more -
What is typical connections with O-ring face seal (ORFS) connectors
O-ring face seal (ORFS) Connectors shown here can be used with tubing or hose as shown below meeting ISO 8434-3. See ISO 12151-1 for applicable hose fittings. Connectors and adjustable stud ends have lower working pressure ratings than nonadjustable stud ends. To achieve...Read more -
Hose fitting selection guide
2 piece hose fitting selection 1 piece hose fitting select linked table 2 piece hose fitting selection 1. How to choice socket type and size for 2 piece fitting step 1 step 2 step 3 step 4 ...Read more -
How to identify ISO 6162-1 and ISO 6162-2 flange connections and components
1 How to identify ISO 6162-1 and ISO 6162-2 flange port See table 1 and figure 1, compare the key dimensions for identify ISO 6162-1 (SAE J518-1 CODE 61) port or ISO 6162-2 (SAE J518-2 CODE 62) port. Table 1 Flange port dimensions ...Read more -
How to assemble flange connections conforming to ISO 6162-1
1 Prepare before assembly 1.1 Ensure that the flange connection selected as ISO 6162-1 meets the requirements of the application (e.g. rated pressure, temperature etc.). 1.2 Ensure that the flange components (flange connector, clamp, screw, O-ring) and ports conform to ...Read more -
How to assemble flange connections conforming to ISO 6162-2
1 Prepare before assembly 1.1 Ensure that the flange connection selected as ISO 6162-2 meets the requirements of the application (e.g. rated pressure, temperature etc.). 1.2 Ensure that the flange components (flange connector, clamp, screw, O-ring) and ports conform to ...Read more -
Instructions for assembling hose fittings in ISO 6149-1 straight thread O-ring port
1 To protect the sealing surfaces and prevent contamination of the system by dirt or other pollutants, do not remove the protective caps and/or plugs until it is time to assemble the components, see below picture. With pr...Read more -
How to assemble 24° cone connectors using cutting rings conforming to ISO 8434-1
There are 3 methods to assemble 24°cone connectors using cutting rings conforming to ISO 8434-1, detail see below. The best practice regarding reliability and safety is achieved by pre-assembling the cutting rings using machines. 1How to assemble C...Read more