China High Quality Medium Pressure Quick Coupling Factories – Hydraulic Fluid Power Connection Winner NPSM Connectors / Adapters – Winner Fluid
China High Quality Medium Pressure Quick Coupling Factories – Hydraulic Fluid Power Connection Winner NPSM Connectors / Adapters – Winner Fluid Detail:
Product Introduction
Winner brand NPSM connectors is meaning that there is NPSM female thread connect end in the connector, NPSM is American National Pipe Straight Mechanical thread, also known as ANSI/ASME B1.20.1 pipe threads.
The NPSM thread is straight pipe thread, and NPT is taper thread. NPSM female swivel connect end with 60° cone, and seal against match with NPT male with conical 60°seat, see below picture.
NPSM thread sizes for Winner connectors include: 1/8”-27, 1/4”-18, 3/8”-18, 1/2”-14, 3/4”-14, 1”-11.5, 1.1/4”-11.5, 1.1/2”-11.5, 2”-11.5.
How to identify it is a NPSM thread and determine the thread size?
1.Visual inspection the internal thread and no taper, or use a inner caliper measure the minor diameter of the internal thread in different length position with same diameter.
2.Measure the thread diameter with an ID caliper, measured on the internal diameter, and holding it perpendicular to the thread for a more accurate female reading.
3.Measure the threads per inch (TPI) or the pitch. As the measured diameter and use relational pitch gauge, try different thread gauges until determine the tightest fit, engage as many threads as possible, there are more thread engaged, the more accurate the reading. Hold the fitting/connector and thread pitch gauge up to the light, looking for gaps between the gauge and thread, this is easier to see on a external thread fitting/connector than a internal thread fitting/connector.
because more than one size can have similar thread dimensions. Below is the data compare between NPSM female thread vs BSP female thread, it is similar, so need careful not mix or mistaken.
|
Size |
NPSM female thread (60°) |
BSP female thread（55°） |
||||
|
thread |
minor |
threads |
thread |
minor |
threads |
|
|
-2 |
1/8″x27 |
9.170 |
27 |
G1/8″x28 |
8.707 |
28 |
|
-4 |
1/4″x18 |
12.052 |
18 |
G1/4″x19 |
11.6675 |
19 |
|
-6 |
3/8″x18 |
15.431 |
18 |
G3/8″x19 |
15.1725 |
19 |
|
-8 |
1/2″x14 |
19.127 |
14 |
G1/2″x14 |
18.9015 |
14 |
|
-12 |
3/4″x14 |
24.486 |
14 |
G3/4″x14 |
24.3875 |
14 |
|
-16 |
1″x11.5 |
30.632 |
11.5 |
G1″x11 |
30.611 |
11 |
|
-20 |
1.1/4″x11.5 |
39.383 |
11.5 |
G1.1/4″x11 |
39.272 |
11 |
|
-24 |
1.1/2″x11.5 |
45.454 |
11.5 |
G1.1/2″x11 |
45.165 |
11 |
|
-32 |
2″x11.5 |
57.493 |
11.5 |
G2″x11 |
56.976 |
11 |
For Winner brand connectors/adaptors, it is easy identify NPSM thread or BSP thread, see below picture, NPSM thread has three small groove mark on the nut hex point, and BSP thread has one small groove mark on the nut hex point.
The normal Winner plating of connectors are free of Cr6+, and the corrosion protection performance reached 360h no red rust, it exceeds normal standard.
Product detail pictures:
Related Product Guide:
We support our purchasers with ideal premium quality products and substantial level company. Becoming the specialist manufacturer in this sector, we've acquired rich practical working experience in producing and managing for China High Quality Medium Pressure Quick Coupling Factories – Hydraulic Fluid Power Connection Winner NPSM Connectors / Adapters – Winner Fluid , The product will supply to all over the world, such as: Sweden, Miami, Nigeria, Till now, the goods list has been updated regularly and attracted clients from around the globe. Detailed facts is often obtained in our web-site and you'll be served with premium quality consultant service by our after-sale group. They are going to help you get comprehensive acknowledge about our products and make a satisfied negotiation. Company go to to our factory in Brazil is also welcome at any time. Hope to obtain your inquiries for any pleased co-operation.
Product Number
Leave Your Message
By Mary from Amman - 2018.12.22 12:52
The company can keep up with the changes in this industry market, product updates fast and the price is cheap, this is our second cooperation, it's good.
By Anna from Japan - 2018.10.01 14:14