China High Quality Hydraulic Tube Connector Factory – Hydraulic Fluid Power Connection Winner NPSM Connectors / Adapters – Winner Fluid
China High Quality Hydraulic Tube Connector Factory – Hydraulic Fluid Power Connection Winner NPSM Connectors / Adapters – Winner Fluid Detail:
Product Introduction
Winner brand NPSM connectors is meaning that there is NPSM female thread connect end in the connector, NPSM is American National Pipe Straight Mechanical thread, also known as ANSI/ASME B1.20.1 pipe threads.
The NPSM thread is straight pipe thread, and NPT is taper thread. NPSM female swivel connect end with 60° cone, and seal against match with NPT male with conical 60°seat, see below picture.
NPSM thread sizes for Winner connectors include: 1/8”-27, 1/4”-18, 3/8”-18, 1/2”-14, 3/4”-14, 1”-11.5, 1.1/4”-11.5, 1.1/2”-11.5, 2”-11.5.
How to identify it is a NPSM thread and determine the thread size?
1.Visual inspection the internal thread and no taper, or use a inner caliper measure the minor diameter of the internal thread in different length position with same diameter.
2.Measure the thread diameter with an ID caliper, measured on the internal diameter, and holding it perpendicular to the thread for a more accurate female reading.
3.Measure the threads per inch (TPI) or the pitch. As the measured diameter and use relational pitch gauge, try different thread gauges until determine the tightest fit, engage as many threads as possible, there are more thread engaged, the more accurate the reading. Hold the fitting/connector and thread pitch gauge up to the light, looking for gaps between the gauge and thread, this is easier to see on a external thread fitting/connector than a internal thread fitting/connector.
because more than one size can have similar thread dimensions. Below is the data compare between NPSM female thread vs BSP female thread, it is similar, so need careful not mix or mistaken.
|
Size |
NPSM female thread (60°) |
BSP female thread（55°） |
||||
|
thread |
minor |
threads |
thread |
minor |
threads |
|
|
-2 |
1/8″x27 |
9.170 |
27 |
G1/8″x28 |
8.707 |
28 |
|
-4 |
1/4″x18 |
12.052 |
18 |
G1/4″x19 |
11.6675 |
19 |
|
-6 |
3/8″x18 |
15.431 |
18 |
G3/8″x19 |
15.1725 |
19 |
|
-8 |
1/2″x14 |
19.127 |
14 |
G1/2″x14 |
18.9015 |
14 |
|
-12 |
3/4″x14 |
24.486 |
14 |
G3/4″x14 |
24.3875 |
14 |
|
-16 |
1″x11.5 |
30.632 |
11.5 |
G1″x11 |
30.611 |
11 |
|
-20 |
1.1/4″x11.5 |
39.383 |
11.5 |
G1.1/4″x11 |
39.272 |
11 |
|
-24 |
1.1/2″x11.5 |
45.454 |
11.5 |
G1.1/2″x11 |
45.165 |
11 |
|
-32 |
2″x11.5 |
57.493 |
11.5 |
G2″x11 |
56.976 |
11 |
For Winner brand connectors/adaptors, it is easy identify NPSM thread or BSP thread, see below picture, NPSM thread has three small groove mark on the nut hex point, and BSP thread has one small groove mark on the nut hex point.
The normal Winner plating of connectors are free of Cr6+, and the corrosion protection performance reached 360h no red rust, it exceeds normal standard.
Product detail pictures:
Related Product Guide:
With this motto in mind, we've come to be one of quite possibly the most technologically innovative, cost-efficient, and price-competitive manufacturers for China High Quality Hydraulic Tube Connector Factory – Hydraulic Fluid Power Connection Winner NPSM Connectors / Adapters – Winner Fluid , The product will supply to all over the world, such as: Spain, Swiss, Zimbabwe, we sincerely hope to establish a good and long-term business relationship with your esteemed company through this opportunity, based on equality, mutual benefit and win-win business from now to the future. "Your satisfaction is our happiness".
Product Number
Leave Your Message
By Doreen from Paraguay - 2017.09.28 18:29
The sales manager is very patient, we communicated about three days before we decided to cooperate, finally, we are very satisfied with this cooperation!
By Kay from kazan - 2017.08.18 18:38