China High Quality Bsp Connectors Manufacturer – Hydraulic Fluid Power Connection Winner NPSM Connectors / Adapters – Winner Fluid
China High Quality Bsp Connectors Manufacturer – Hydraulic Fluid Power Connection Winner NPSM Connectors / Adapters – Winner Fluid Detail:
Product Introduction
Winner brand NPSM connectors is meaning that there is NPSM female thread connect end in the connector, NPSM is American National Pipe Straight Mechanical thread, also known as ANSI/ASME B1.20.1 pipe threads.
The NPSM thread is straight pipe thread, and NPT is taper thread. NPSM female swivel connect end with 60° cone, and seal against match with NPT male with conical 60°seat, see below picture.
NPSM thread sizes for Winner connectors include: 1/8”-27, 1/4”-18, 3/8”-18, 1/2”-14, 3/4”-14, 1”-11.5, 1.1/4”-11.5, 1.1/2”-11.5, 2”-11.5.
How to identify it is a NPSM thread and determine the thread size?
1.Visual inspection the internal thread and no taper, or use a inner caliper measure the minor diameter of the internal thread in different length position with same diameter.
2.Measure the thread diameter with an ID caliper, measured on the internal diameter, and holding it perpendicular to the thread for a more accurate female reading.
3.Measure the threads per inch (TPI) or the pitch. As the measured diameter and use relational pitch gauge, try different thread gauges until determine the tightest fit, engage as many threads as possible, there are more thread engaged, the more accurate the reading. Hold the fitting/connector and thread pitch gauge up to the light, looking for gaps between the gauge and thread, this is easier to see on a external thread fitting/connector than a internal thread fitting/connector.
because more than one size can have similar thread dimensions. Below is the data compare between NPSM female thread vs BSP female thread, it is similar, so need careful not mix or mistaken.
|
Size |
NPSM female thread (60°) |
BSP female thread（55°） |
||||
|
thread |
minor |
threads |
thread |
minor |
threads |
|
|
-2 |
1/8″x27 |
9.170 |
27 |
G1/8″x28 |
8.707 |
28 |
|
-4 |
1/4″x18 |
12.052 |
18 |
G1/4″x19 |
11.6675 |
19 |
|
-6 |
3/8″x18 |
15.431 |
18 |
G3/8″x19 |
15.1725 |
19 |
|
-8 |
1/2″x14 |
19.127 |
14 |
G1/2″x14 |
18.9015 |
14 |
|
-12 |
3/4″x14 |
24.486 |
14 |
G3/4″x14 |
24.3875 |
14 |
|
-16 |
1″x11.5 |
30.632 |
11.5 |
G1″x11 |
30.611 |
11 |
|
-20 |
1.1/4″x11.5 |
39.383 |
11.5 |
G1.1/4″x11 |
39.272 |
11 |
|
-24 |
1.1/2″x11.5 |
45.454 |
11.5 |
G1.1/2″x11 |
45.165 |
11 |
|
-32 |
2″x11.5 |
57.493 |
11.5 |
G2″x11 |
56.976 |
11 |
For Winner brand connectors/adaptors, it is easy identify NPSM thread or BSP thread, see below picture, NPSM thread has three small groove mark on the nut hex point, and BSP thread has one small groove mark on the nut hex point.
The normal Winner plating of connectors are free of Cr6+, and the corrosion protection performance reached 360h no red rust, it exceeds normal standard.
Product detail pictures:
Related Product Guide:
"Based on domestic market and expand overseas business" is our development strategy for China High Quality Bsp Connectors Manufacturer – Hydraulic Fluid Power Connection Winner NPSM Connectors / Adapters – Winner Fluid , The product will supply to all over the world, such as: South Korea, Puerto Rico, Sao Paulo, With many years good service and development, we have a qualified international trade sales team. Our goods have exported to North America, Europe, Japan, Korea, Australia, New Zealand, Russia and other countries. Looking forward to build up a good and long term cooperation with you in coming future!
Product Number
Leave Your Message
By Miriam from Belgium - 2018.06.03 10:17
We have worked with many companies, but this time is the best，detailed explanation, timely delivery and quality qualified, nice!
By Mildred from Tanzania - 2018.05.15 10:52